Density Sensor (Aidc); Torque Limiter - Xerox Phaser 6120 Service Manual

Density Sensor (AIDC)

1.
Remove the Transfer Belt. See
2. On the transfer belt, remove two screws [1] and the Density Sensor protective cover [2].
3.
Disconnect the connector [3] and remove the Density Sensor [4].

Torque Limiter

1.
Remove the Paper Take-up Unit. See
2.
Remove the screw [1] and the Paper Take-up Clutch.
3.
Disassemble the Paper Take-up Clutch and remove the torque limiter [2].
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
Transfer Belt on page 2-12.
[1]
[2]
4139fs2061c0
[3] [4]
4139fs2062c0
Paper Take-Up Unit
[2]
[1]
4139fs2512c0
5-37
on page 5-23.