Left Cover - Xerox Phaser 6120 Service Manual

Left Cover

1. Open the Top Cover.
2. Remove two screws [1].
3.
Slightly pull the cover away from the printer and lift it to release the two tabs [2] and
remove the Left Cover [3].
Caution:
Use care not to break the tabs during removal and reinstallation of the Left Cover.
Note:
When installing the Left Cover, make sure that the harness [4] of the Fuser is located
below the rib [5] of the Left Cover.
After installing the Left Cover, make sure that the harness [4] of the Fuser is located
below the rib [5] of the Left Cover at the location shown on the left.
Phaser® 6120 Color Laser Printer Service Manual
[1]
[2]
[4]
[5]
[5]
5-5
Disassembly/Assembly Procedures
[3]
4139fs2014c1
[4]
4139fs2549c0