Control Panel (Pwb-Op) - Xerox Phaser 6120 Service Manual

Control Panel (PWB-OP)

1. Open the Top Cover.
2. Disconnect the connector from the Transfer Belt.
3.
Remove four screws [1] and disconnect the Control Panel Protective Cover [2] from the
Top Cover.
4. Remove five screws and disconnect the connector(PJ1), and then remove the Control
Panel.
Phaser® 6120 Color Laser Printer Service Manual
[1]
[2]
[1]
4139fs2514c0
5-8
Disassembly/Assembly Procedures