Code
Description
24
Fuser Temp Faulty Thermistor
Resistor
29
Faulty NVRAM counter
2A
Faulty NVRAM data
2B
NVRAM access failure
2C
NVRAM Install failure
Firmware Update Writing Error
Resetting the Printer:
To reset the printer after a malfunction has occurred, turn the Power Switch OFF, and then ON
again.
Phaser® 6120 Color Laser Printer Service Manual
Error Codes and Messages Index
Detection Timing
The Heater Lamp remains ON for a predetermined
consecutive period of time.
It is determined that the life counter value is faulty when the
NVRAM data is read as the Power Switch is turned ON.
It is determined that the NVRAM data is faulty when read.
It is determined that there is a NVRAM data access failure.
Mounting of the NVRAM on the Mechanical Control Board
is faulty.
4-14