Xerox Phaser 6120 Service Manual page 73

DUPLEX
Function Selects whether or not the duplex print function is used.
Use To use the duplex print function.
OFF: Duplex printing is not possible.
LONG EDGE: The pages will be printed on both sides of the paper for long-
edge binding.
SHORT EDGE: The pages will be printed on both sides of the paper for
short-edge binding.
Setting/procedure The default setting is OFF.
"OFF", LONG EDGE, SHORT EDGE
This setting is available only when a Duplex Unit is installed.
ORIENTATION
Function Specifies the orientation of the media.
Use To change the orientation of the media.
Setting/procedure The default setting is PORTRAIT.
"PORTRAIT", LANDSCAPE
JAM RECOVERY
Function Selects whether or not the page is printed again after recovering from a
media misfeed.
Use To specify the point from which printing should continue after a media
misfeed.
ON: The page that was misfeed is printed again.
OFF: Printing continues with the next page without reprinting the misfed
page.
Setting/procedure The default setting is ON.
"ON", OFF
Phaser® 6120 Color Laser Printer Service Manual
3-17