Xerox Phaser 6120 Service Manual page 72

MEDIA TYPE
Function
Use
Setting/procedure
CUSTOM
WIDTH
Function
Use
Setting/procedure
LENGTH
Function
Use
Setting/procedure
AUTO CONTINUE
Function
Use
Setting/procedure
TRAY SWITCHING
Function
Use
Setting/procedure
Phaser® 6120 Color Laser Printer Service Manual
Specifies the setting for the type of media loaded in Tray 2.
To specify the type of media loaded in Tray 2.
The default setting is PLAIN PAPER.
PLAIN PAPER, LETTERHEAD
Specifies the width of the custom-sized paper in Tray 1.
To specify the width of the custom-sized media in Tray 1.
On the model for North America, the settings appear in inches and the
menu item appears as WIDTH (IN). On the models for all other regions,
the settings appear in millimeters and the menu item appears as
WIDTH (MM).
The default setting is 92.0 mm (3.62 in.).
92.0 to 216.0 mm (3.62 to 8.50 in.)
Specifies the length of the custom-sized paper in Tray 1.
To specify the length of the custom-sized media in Tray 1.
On the model for North America, the settings appear in inches and the
menu item appears as LENGTH (IN). On the models for all other regions,
the settings appear in millimeters and the menu item appears as
LENGTH (MM).
The default setting is 148.0 mm (5.83 in.).
148.0 to 356.0 mm (5.83 to 14.02 in.)
Enables or disables printing when the size of the media loaded in the tray
does not match that of the print data.
To print data on the media loaded in the tray of the media loaded in the tray
does not match that of the print data.
The default setting is ON.
"ON", OFF
Allows a print cycle to continue without interruption when the current tray
runs out of media during the print cycle by automatically reselecting another
tray, in which the media of the same size and the same type is loaded.
To allow media to be pulled from another tray when the media in the first tray
runs out.
The default setting is ON.
"ON", OFF
Note: This setting is available only when an optional Lower Feeder Unit is
installed.
3-16
Menu Map