Xerox Phaser 6120 Service Manual page 144

9.
Remove six screws [13] and pull the rear plate containing the Power Unit Assy [14] away
from the printer.
Note: Do not pull the rear plate hard, as a number of harnesses are connected to it.
10. Disconnect four connectors [16] from the Power Unit [15].
11. Remove three screws [17], and then the Power Unit [15] from underneath the
brackets [18].
Phaser® 6120 Color Laser Printer Service Manual
[13]
[13]
[16]
[16]
[17]
[18]
5-16
Disassembly/Assembly Procedures
[14]
4139fs2024c2
[15]
4139fs2026c1