Xerox Phaser 6120 Service Manual page 64

Error Messages (Continued)
Message
PAPER JAM TRAY 1
PAPER JAM TRAY 2
PAPER JAM DUPLEX
PAPER JAM TRANSFER Jam at Transfer Roller
PAPER JAM FUSER
PAPER JAM EXIT
DENSITY SENSOR
ERROR
PUT [paper size] [paper
type] IN ANY T RAY
PUT [paper size] [paper
type] IN TRAY1
IMAGING UNIT
MISSING
CYAN TONER MISSING Cyan toner cartridge is not installed.
Phaser® 6120 Color Laser Printer Service Manual
Description
Jam at Tray 1
Or
Paper exists at Tray 1 after jam occurs.
Jam at Tray 2
Or
Paper exists at Tray 2 after jam occurs.
Jam at Switchback
or
Jam at duplex paper path (07H) or
Paper exists at refeed area /switchback section of duplex option after jam
occurs.
or
Paper exists at Transfer Roller after jam occurs.
Jam at Fusing Unit
or
Paper exists at Fuser area after jam occurs.
Jam at Ejection section
or
Paper exists at Fuser area after jam occurs.
PUT [paper size] [ media type]
IN ANY TRAY
By putting specified paper in specified tray and closing tray, printer
automatically restarts.
Cancel Key is Active
PUT [paper size] [ media type]
IN TRAY1
By putting specified paper in specified tray and closing tray, printer
automatically restarts.
Cancel Key is Active
Drum is not attached.
When more than one cartridge is missing, the Control Panel messages "xx
TONER/MISSING" for the corresponding missing cartridges is shown with
the priority in the order of c/b/y/m. The developing rack will be positioned so
that the user can install the corresponding missing cartridge in the order of c/
b/y/m.
The message may also appear if the engines does not recognize the
cartridge as a Xerox product.
3-8
Index of Control Panel Messages