Xerox Phaser 6120 Service Manual page 81

DATE & TIME
Function
Use
Setting/procedure
ENERGY SAVER
Function
Use
Setting/procedure
ENERGY SAVER MGT
Function
Use
Setting/procedure
SECURITY
CONFIG
ENABLE
Function
Use
Setting/procedure
Phaser® 6120 Color Laser Printer Service Manual
Sets the TOD (time-of-day) clock on the hard drive.
To adjust the TOD clock on the hard drive.
The settings appear in the following order: year, month, day:hour,
minutes, seconds.
Note: This menu item appears only if an optional hard drive installed.
1. Select "DATE & TIME."
2. Using , , , and keys, enter the time-of-day, and day, month, and
year.
3. Accept the date and time setting using the Menu Select key.
Specifies the length of time before the machine enters Energy Saver mode
after the last print is received or the last key operated.
To set the amount of time before the machine enters Energy Saver mode.
The default setting is 30 MINUTES.
15 MINUTES
30 MINUTES
1 HOUR
2 HOURS
* Displayed only on the 110 V models.
Note: This setting is available only when SYSTEM DEFAULT→ ENERGY
SAVER MGT is set to "ON."
Sets whether the printer should go into Energy Saver mode when not printing
or processing a print job and when the Control Panel is not being used.
To specify whether Energy Saver mode is to be used.
The default setting is ON.
ON/OFF
Note: This menu item is available only on the 110 V model.
Selects whether or not the menus are protected with a password.
To protect all menus with a password.
The default setting is OFF.
ON/OFF
3-25