Xerox Phaser 6120 Service Manual page 143

5.
Disconnect the two white connectors [7] of the Power Switch.
6.
On the right side of the printer, remove a screw [8] and remove the Power Supply Cooling
Fan Motor Cover [9].
7.
Remove the Harness Protective Seal [12] from the rear plate.
8. Remove the black plastic guide at the bottom of the printer by pushing the two locking
tabs on the right side and then allow the guide to fall.
Note:
Notice the orientation of the black plastic guide and reinstall it in the same
orientation.
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
[7]
4139fs2023c2
[8]
4139fs2073c1
[12]
4139fs2075c1
5-15
[9]