Xerox Phaser 6120 Service Manual page 106

15: Transfer Belt Cleaning Blade Pressure/Retraction Failure
*Retraction Position Sensor /Cleaning Blade (PC6)
Pressure/Retraction Solenoid /Cleaning Blade (SL3)
Main Motor (M1)
* PC6 is part of the transfer belt.
Step Action
1 Check the M1 connector for proper
connection and correct as necessary.
2 Check M1 for proper drive coupling and
correct as necessary.
3 Check the SL3 connector for proper
connection and correct as necessary.
4 Check the PWB-A connector for proper
connection and correct as necessary.
5 PC6 sensor check.
6 SL3 operation check.
7 M1 operation check.
8 Change PWB-A.
16: Transfer Belt Rotation Failure
Transfer Belt
Step Action
1 Check the PWB-A connector for proper
connection and correct as necessary.
2 Change Transfer Belt.
3 Change PWB-A.
Phaser® 6120 Color Laser Printer Service Manual
Error Codes and Messages Troubleshooting Procedures
Relevant Electrical Parts
PWB-A (Engine Control Board)
Control Signal
-
-
-
-
PWB-A PJ9A-11 (ON)
PWB-A PJ10-5 (REM)
PWB-A PJ8A-5 (REM)
PWB-A PJ8A-8 (LOCK)
-
Relevant Electrical Parts
PWB-A (Engine Control Board)
Control Signal
-
-
-
4-18
WIRING DIAGRAM
Location (Electrical
Component)
-
-
-
-
2-F
2-F
2-G∼ H
-
WIRING DIAGRAM
Location (Electrical
Component)
-
-
-