Xerox Phaser 6120 Service Manual page 7

Avoid the potential of electrical shock by ensuring that the printer is properly grounded.
Electrical products may be hazardous if misused.
Do not place the printer in an area where people might step on the power cord.
Do not place objects on the power cord.
Do not block the ventilation openings. These openings are provided to prevent
overheating of the printer.
Do not drop paper clips or staples into the printer.
Do not push objects into slots or openings on the printer. Making contact with a
voltage point or shorting out a part could result in fire or electrical shock.
If you notice unusual noises or odors:
Turn off the printer immediately.
Disconnect the power cord from the electrical outlet.
Call an authorized service representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the printer. If it
is necessary to disconnect all electrical power from the printer, disconnect the power cord
from the electrical outlet.
Power should be OFF when servicing the printer, unless a procedure instructs
otherwise.
Phaser® 6120 Color Laser Printer Service Manual
vi