Xerox Phaser 6120 Service Manual page 152

5.
Remove one screw [1], unlock the tab [2], and release the wiring harness from the saddle
[3]. Then, remove the shield [4].
Warning:
When reinstalling the shield, make sure that no part of the harness is wedged in
the mechanism.
6. Remove the Rack Drive Assy. See the removal procedure steps 1 to 3 of
(M3) on page 5-30.
7. Remove the Ventilation Fan Motor. See
8. Remove one screw [1], unlock two tabs [2], loosen the 4 wiring harnesses that feed the
laser, and then remove the Ventilation Fan Duct [3].
9. Lay the main body of the printer on its back of the printer.
Caution:
Be careful not to pinch the wires on the back of the printer.
10.
Remove the Power Supply Cooling Fan and shroud.
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
[1] [2]
[3] [4]
4139fs2030c1
Ventilation Fan Motor (M6)
[1]
[3]
[2]
4139fs2077c1
5-24
Developing Motor
on page 5-28.