Restore Factory Settings (Margins); Reset Calibrations (Color, Margins, Paper); Resetting All Printer Default Settings (Nvram); Resetting Engine Nvram - Xerox 7700DX - Phaser Color Laser Printer Service Manual
Color laser printer
Hide thumbs
Also See for 7700DX - Phaser Color Laser Printer:
- User manual (35 pages) ,
- Advanced features and troubleshooting manual (69 pages)
Table of Contents
Advertisement
Restore Factory Settings (margins)
You can reset margin settings to the factory-default values.
Caution
Use caution when resetting your margins to the
factory-default settings. Changing these settings back to
factory defaults may not be the last-saved settings if you
have previously calibrated your margins.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Improve print-quality and press OK.
3.
Highlight Calibrate Colors Menu and press OK.
4.
Highlight Restore Factory Settings and press OK.
5.
Highlight Restore Factory Settings and press OK to reset the margin
settings.
Reset Calibrations (color, margins, paper)
Note
Resetting calibrations resets the color, margin, and
paper settings.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Improve print-quality and press OK.
3.
Highlight Reset Calibrations and press OK.
4.
Highlight Reset Calibrations NOW and press OK to reset the color,
margins and paper (transfer) settings to factory defaults.
Resetting All Printer Default Settings (NVRAM)
Resetting the NVRAM resets all printer values including network, printer
setup, job defaults, color, margin, and paper calibrations.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Service Tools Menu and press OK.
3.
Reset NVRAM is displayed, press OK.
4.
Highlight Reset NVRAM and Reset Printer NOW and press OK to reset
all the settings to default.
Resetting Engine NVRAM
Resetting (restoring) the engine NVRAM values resets the RegiCon color,
margin and A4/B5 selection paper settings to default. This is NOT the
diagnostics reset. To restore data stored on the hard drive to NVRAM, see
"Reset Engine NVRAM" on page 6-150.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Service Tools Menu and press OK.
3.
Reset NVRAM is displayed.
4.
Highlight Reset Engine NVRAM NOW and press OK.
6-146
Phaser 7700 Color Laser Printer Service Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
