Printing The Configuration Page; Resetting The Printer - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Printing the Configuration Page

It is important to print a Configuration Page from the printer to determine the current
network settings of your Phaser 2135 printer. The default settings enable all ports, which
are suitable for most applications. Refer to the page 18 for step-by-step instructions on
printing a Configuration Page.
Note
If you change any settings, print another Configuration Page to verify that your
changes were made.

Resetting the Printer

To Reset your printer from the Front Panel:
1. Press Menu Up or Menu Down until you see:
2. Press Item Up or Item Down until you see:
3. Press Value Up or Value Down until you see:
4. Press Enter. You should see:
5. Press On Line. You should see:
Advanced Features and Troubleshooting Manual
Menus
Job Menu
Job Menu
Restart Printer
Restart Printer
Yes
Job Menu
Restart Printer
Ready
Networking
111