Table of Contents
Advertisement
Draft Document for Review October 18, 2004
For a non-U.S.A. keyboard or mouse and display, see:
http://www.iseries.ibm.com/windowsintegration
OS/400 V5R2 plus PTFs, or later, is required. For required PTF information, refer
to Informational APAR II13609 at:
http://www.ibm.com/eserver/iseries/support
Migration tower PCI hardware
Some or all of the IOPs in the following sections were
This section offers a reference to assist in planning system upgrades.
Important: Keep in mind that IBM Eserver i5 520, 550, 570, and 595, and
iSeries 800, 810, 825, 870, and 890 models do not support migration towers.
#2809 PCI LAN/WAN/Workstation IOP
The #2809 PCI LAN/WAN/Workstation IOP can be used for attaching PCI LAN,
WAN, and workstation IOAs to the system. The #2809 supports different
combinations of cards depending on where it is installed on the #503x Migration
Tower. It is supported for migration only on the #503x Migration Tower.
The #2809 was
#2824 PCI Feature Controller
This IOP is a feature I/O processor with 32 MB of memory installed on the #5034
and #5035 Migration Tower I, the #5055 Storage Expansion Unit, and the #5066
1.8 M I/O Tower. It is supported for migration only on the #503x Migration Tower.
The #2824 was
#2865 PCI Integrated Netfinity Server
The #2865 PCI Integrated Netfinity Server contains an Intel 333 MHz Pentium II
processor, four main storage slots, and two LAN IOA slots. The #2865 provides
high performance serving to LAN attached PCs. OS/2® Warp Server for AS/400,
Novell NetWare, Lotus Domino, Flowmark, Firewall for AS/400, and Microsoft
Windows NT Server are supported on the Integrated Netfinity Server.
withdrawn from marketing
withdrawn from marketing
withdrawn from marketing
on 31 May 2001.
on 29 December 2001.
iSeries I/O processors
5486IOp.fm
.
333
- Quick Links:
- Front Cover
Hide quick links:
Advertisement
Table of Contents
