Main Storage - IBM eserver i5 Handbook

5486m595.fm
Refer to "Table 5: Summary of the iSeries Model 595" on page 93 to find
Processor CPW, Mail and Calendar Users (MCU), and 5250 CPW, and to
determine the processor feature code.

Main storage

Supported memory features for the Model 595 are:
#7828 -16 GB Main Storage (DDR1 memory card CCIN 304E)
Ships one fully activated memory card
#7829 - 32 GB Main Storage (DDR1 memory card CCIN 30F9)
Ships one fully activated memory card
Note: The #7829 is planned to be available in second quarter 2005.
#7816- 2/4 GB CUoD Main Storage (DDR1 memory card CCIN 303E)
Ships one memory card.
2 GB system memory is activated. An additional two GB of system memory is
available for activation in increments of one GB (#7970)
#7835- 4/8 GB CUoD Main Storage (DDR1 memory card CCIN 303F)
Ships one memory card.
4 GB system memory is activated. An additional four GB of system memory is
available for activation in increments of one GB. (#7970)
#8195 - 256 GB Main Storage (32 x 8 GB)
The #8395 provides 32 fully activated 8 GB memory card features for a total
of 256 GB of active DDR1 system memory. The #8195 feature is shown on
the order and in the install records, not 32 #7835 features.
#8197 - 512 GB Main Storage (32 x 16 GB)
The #8197 provides 32 fully activated memory features for a total of 512 GB
of active DDR1 system memory. The #8198 feature is shown on the order and
in the install records, not 32 #7828 features.
#8198 - 512 GB Main Storage (16 x 32 GB)
The #8198 provides 16 #7829 32 GB fully activated memory features for a
total of 512 GB of active DDR1 system memory. The #8198 feature is shown
on the order and in the install records, not 16 #7829 features.
The Model 595 offers pluggable DDR1 memory cards. Each processor book has
16 slots for memory cards. The minimum memory for a Model 595 is four
IBM Eserver i5 and iSeries System Handbook
166
Draft Document for Review October 18, 2004