Required Features - IBM eserver i5 Handbook

Draft Document for Review October 18, 2004
#9730 Base HSL-2 Ports - 4 Copper (CCIN 273B)
#9771/#9793/#9794 Base PCI Two-Line WAN with integrated modem
#9844 Base PCI IOP provides support for:
– The required Small Computer System Interface (SCSI) input/output
adapter (IOA), which controls up to 15 disk units, the required
DVD-RAM/DVD-ROM, and a feature internal tape or a feature
DVD-RAM/DVD-ROM
– A base console/workstation IOA
The IBM marketing configurator determines which feature combinations
are to be on the order based on the #5540, #5544, #5546, or #5548
System Console specify code.
– The #9771/#9793/#9794 Base PCI Two-Line WAN with integrated modem

Required features

required
The
Specific combinations of the Processor feature, Edition feature, and Server
feature are allowed as shown in the following table:
Processor
feature
#2486
#2489
#2496
Note: In countries (or regions) where #9771/#9793/#9794 is not
homologated, the marketing configurator adds a #4745 PCI Two-Line
WAN IOA or a #2742 PCI Two-Line WAN IOA, a #0032 modem feature,
and a #0348 cable to the order. The #4745/#2742 is mandatory and
cannot be removed from the system until the #9793/#9794
homologation is completed. The #0032 and #0348 features may be
removed from the order or system at any time.
features include:
Server Edition feature
feature
#0886 #7419 Standard
#7421 Enterprise
#7436 High Availability
#0889 #7431 Standard
#7433 Enterprise
#7435 High Availability
#0891 #7440 Capacity BackUp
5486m870.fm
Software group Processor
feature code
or
QPRCFEAT
value
P40 7419
P40 7421
P40 7421
P40 7431
P40 7433
P40 7433
P40 7440
iSeries Model 870
219