Table of Contents
Advertisement
Draft Document for Review October 18, 2004
New with V5R3
A new security page sets scanning settings for objects created in files and
folders. It also specifies auditing value, change options, user ID, and primary
group ID.
Ability to make objects savable
Ability to set objects created in a folder to be scanned
Restrict rename and unlink
UDFS enhancements
– Setting objects to be scanned
– Restricting rename and unlink
– Specify a default file format for UDFS
– User and group ID settings cannon be changed on a mounted UDFS
Ease of installation, use, and maintenance with i5/OS
and OS/400
Operations Console
iSeries 800, 810, 825, 870, and 890 servers support a directly-attached or
LAN-attached full-function 5250 PC console that includes a graphical control
panel application. The user interface of the control panel application resembles
its hardware counterpart.
The console emulator application (PC5250) serves as the console "device" of the
iSeries server. The graphical control panel application permits remote entry of
most of the functions supported by the hardware control panel mounted on the
front of iSeries server units.
Control panel functions, such as power up/down, re-initial program load (IPL),
and mode changes, are supported. The console and control panel applications
can be used together or separately, but each requires its own direct cable
attachment to an iSeries server. Each cable must be purchased separately from
IBM for the iSeries model being used. Both cables are only available in a single
length of six meters.
Functions provided by Operations Console and Remote Operator and Control
Panel, are managed via the Hardware Management Console (HMC) for the
Model 520, 550, 570 and 595. To understand equivalent functions to operations
console for the Models 520, 550, 570 and 595, refer to "Hardware Management
Console" on page 742.
i5/OS and OS/400 (5722-SS1): Architecture
5486OpS.fm
533
- Quick Links:
- Front Cover
Hide quick links:
Advertisement
Table of Contents
