IBM eserver i5 Handbook page 143

Draft Document for Review October 18, 2004
Note 6d Software group is determined by the combination of processor feature and edition feature. Display the
Model 595 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. See table in models chapter for a cross reference.
Note 6c Software group is determined by the combination of processor feature and edition feature. Display the
Model 800 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. See table in models chapter for a cross reference.
Note 6d Software group is determined by the combination of processor feature and edition feature. Display the
Model 810 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. See table in models chapter for a cross reference.
Note 6e Software group is determined by the combination of processor feature and edition feature. Display the
Model 825 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. See table in models chapter for a cross reference.
Note 6f Software group is determined by the combination of processor feature and edition feature. Display the
Model 870 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. See table in models chapter for a cross reference.
Note 6g Software group is determined by the combination of processor feature and edition feature. Display the
Model 890 QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity
Upgrade on Demand. This table provides a cross reference.
Note 7 External DASD capacity assumes 70.56 GB LUNs. External DASD cannot exceed the maximum system
capacity or the maximum number of disk arms.
Note 7a There must be one DVD-ROM or DVD-RAM per system. For Models 870 and 890, there must be one
DVD-RAM or DVD-ROM in the #9094 Base PCI I/O Enclosure.
Note 8 V5R3 with the (month) 2004 level of LIC and Cumulative PTF package C4nnn530 or V5R3 with the
(month) 2004 level of LIC and Cumulative PTF Package C4nnn530. For the latest information, refer to
Informational APAR II13365 on the Web at:
http://www.ibm.com/support/us/
Note 8a V5R2 with the February 2003 level of LIC and Cumulative PTF package C3021520 or V5R2 with the May
Model 810 2003 level of LIC and Cumulative PTF Package C3161520. For the latest information, refer to
Informational APAR II13365 on the Web at:
http://www.ibm.com/support/us/
Note 8b V5R2 with the February 2003 level of LIC and Cumulative PTF package C3021520.
Model 800
825 870 890
5486SSum.fm
Summary of today's iSeries
109