IBM eserver i5 Handbook page 322

5486Towr.fm
http://www-1.ibm.com/servers/eserver/support/iseries/planning/
index.html
Up to four Power Distribution Units may be installed in the #0551. The PDUs may
be ordered as part of the initial order or added at a later time. Each PDU has six
power sockets that provide power for devices that support the #1422 PDU Line
Cord. A country (region)-specific line cord must be ordered for each PDU to
connect to external power.
The supported PDUs are:
#5160 Power Distribution Unit - 1 Phase NEMA
#5161 Power Distribution Unit - 1 Phase IEC
#5162 Power Distribution Unit - 2 of 3 Phase
#5163 Power Distribution Unit - 3 Phase
#7188 Power Distribution Unit - 1 or 3 Phase
The supported specify codes are:
#0121 Lower Unit in Rack Specify (270) (
November 2003)
#0122 Upper Unit in Rack Specify (270) (
November 2003)
#0133 Plant Install in Rack
– #0133 Plant Install in Rack feature is used to mount a Model 270, 800 or
810 system unit (sidecar feature must be present) in a #0551 rack either in
the plant or in the field.
– #0133 Plant Install in Rack is IBM installed in the plant or customer
installed in the field.
– #0133 can be ordered on initial orders, MES orders, or model upgrades
into the Model 810.
– If the system order received at the plant contains a system unit, sidecar
feature (#7104 or #7116), #0551 rack, and the #0133, the system is
mounted in the #0551 at the plant. If any of these four components are
missing from the order, the system is
plant.
– It the system is not installed in a #0551 in the plant, the #0133 feature
provides the hardware components: a set of "slides", cable management
arm, a heavy duty tray, a 270/800/810 adapter plate, and a pair of
270/800/810 lift covers. The #0133 is customer installed in the field.
– A line cord is required for both the system unit and the system unit
expansion.
IBM Eserver i5 and iSeries System Handbook
288
Draft Document for Review October 18, 2004
withdrawn from marketing
withdrawn from marketing
not
mounted in the #0551 at the
21
21