Draft Document for Review October 18, 2004
#4450 - 16 GB DDR Main Storage (DDR1 - 1 Gb technology, stacked, CCIN
30AC)
Ships four 4 GB DIMMs for a total of 16 GB
Configuration considerations for memory include:
DIMMs must be installed in sets of four (quads) with one exception. A single
pair of 256 MB DIMMs is allowed on the #8950 processor. Whenever more
DIMMs are added, an additional pair of 256MB DIMMs must be added to the
original pair (to make a quad). Then one additional quad of DIMMs may be
added to the system.
For processor #8950, the first DIMM pair goes into DIMM slots J0A and J2A.
The second pair of DIMMs goes into slots J0C and J2C.
The first quad of DIMMs is plugged into DIMM slots J0A, J2A, J0C, and J2C.
The second quad of DIMMs is plugged into DIMM slots J0B, J2B, J0D, and
J2D.
The following table shows allowable main storage capacities in MB for the Model
520 processors.
*
512
4096
9216
17408
32768
* 512 MB is allowed on the #8950 only.
9406 Model 520 schematics
The following diagrams show the slot and feature card arrangement of the Model
520 system unit, processor, memory cards, and supported expansion units.
1024
2048
5120
6144
10240
12288
18432
20480
5486m520.fm
3072
8192
16384
24576
119
iSeries Model 520