High-Speed Link For Model 520 - IBM eserver i5 Handbook

5486m520.fm
* *
Power Supply
Power Supply
E1 E2
Serial
Port
1
T3 [HSL-2/RIO-G]
0
T4 [HSL-2/RIO-G]
Serial
Port
= BASE
*
= Hot Plug Capable
Note: You can find line cord and power receptacle specification information on
the Web at:
http://www.ibm.com/eserver/iseries/infocenter

High-speed link for Model 520

The Model 520 supports a single HSL-2/RIO-G loop. The maximum rated speed
of the HSL-2/RIO-G is 2 Gbps, which is double the speed of the previous
HSL/HSL-2 adapters. The following rules apply to towers that are supported at
these speeds:
New #5094, #5294, #0595, and #5095s come with a #9517 HSL-2/RIO-G
adapter. The #5790 PCI Expansion Drawer comes with a #9531
HSL02/RIO-G adapter.
HSL-2 adapters in existing #5094, #5294, #0595, and #5095 towers must be
replaced with a #6417 2 GBps HSL-2/RIO-G adapter.
IBM Eserver i5 and iSeries System Handbook
122
520 Rear Locations
Gb USB0 RackInd
Ethernet T7 T9
T5
USB1
T8
Gb
Ethernet
T6
Draft Document for Review October 18, 2004
HMC 1
C7 - T1
HMC 2
C7 - T2
*
P1 - C6
*
P1 - C5
*
P1 - C4
*
P1 - C3
* SPCN 1
P1 - C2
*
P1 - C1
SPCN 0
C7-T3
IP
C7-T4