Command Accounting - HP A7500 Series Command Reference Manual

# Use password authentication when users log in to the device through VTY 0, and set the authentication
password to 321.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode password
[Sysname-ui-vty0] set authentication password cipher 321
# Authenticate users by username and password for VTY 0. Set the username to 123 and the password
to 321.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode scheme
[Sysname-ui-vty0] quit
[Sysname] local-user 123
[Sysname-luser-123] password cipher 321
[Sysname-luser-123] service-type telnet
[Sysname-luser-123] authorization-attribute level 3

command accounting

Syntax
command accounting
undo command accounting
View
User interface view
Default level
3: Manage level
Parameters
None
Description
Use the command accounting command to enable command accounting.
Use the undo command accounting command to restore the default.
By default, command accounting is disabled. The accounting server does not record the commands that
users have executed.
When command accounting is enabled and command authorization is not, every executed command is
recorded on the HWTACACS server.
When both command accounting and command authorization are enabled, only the authorized and
executed commands are recorded on the HWTACACS server.
Examples
# Enable command accounting on VTY 0. Then the HWTACACS server records the commands executed
by users that have logged in through VTY 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command accounting
18