Configuring Command Accounting; Configuration Procedure - HP 6125XLG Configuration Manual

Step
4. Enable command
authorization.

Configuring command accounting

Command accounting allows the HWTACACS server to record all executed commands that are
supported by the device, regardless of the command execution result. This function helps control and
monitor user behaviors on the device.
When command accounting is disabled, the accounting server does not record the commands executed
by users. If command accounting is enabled but command authorization is not, every executed
command is recorded on the HWTACACS server. If both command accounting and command
authorization are enabled, only authorized commands that are executed are recorded on the
HWTACACS server.
This section provides only the procedure for configuring command accounting. To make the command
accounting function take effect, you must configure a command accounting method in ISP domain view.
For more information, see Security Configuration Guide.

Configuration procedure

To configure command accounting:
Step
1. Enter system view.
2. Enter user interface
view.
Command
command authorization
Command
system-view
user-interface { first-number1
[ last-number1 ] | { aux | console
| vty } first-number2
[ last-number2 ] }
40
Remarks
By default, command authorization is
disabled, and the commands available for
a user only depend on the user role.
This command takes effect immediately
after it is configured. Configure the
command authorization method in ISP
domain view before configuring this
command.
Remarks
N/A
N/A