Display System-Working-Mode - HP 6125XLG Command Reference Manual

network-operator
Parameters
schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. Without
this option, the command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name
Schedule type
Start time
Last execution time
Last completion time : Tue Dec 27 10:44:47 2011
Execution counts
-----------------------------------------------------------------------
Job name
shutdown
Table 35 Command output
Field
Schedule type
Start time
Last execution time
Last completion
time
Execution counts
Job name
Last execution
status

display system-working-mode

Use display system-working-mode to display the current system working mode.
: shutdown
: Run once after 0 hours 2 minutes
: Tue Dec 27 10:44:42 2011
: Tue Dec 27 10:44:42 2011
: 1
Description
Execution time setting of the schedule. If no execution time is specified, this field is not
displayed.
Time to execute the schedule for the first time. If no execution time is specified, this field
is not displayed.
Last time when the schedule was executed. If no execution time is specified, this field is
not displayed. If the schedule has never been executed, "Yet to be executed" is displayed
for this field.
Last time when the schedule was completed. If no execution time is specified, this field is
not displayed.
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Name of a job under the schedule.
Result of the most recent execution:
•
Successful.
•
Failed.
•
Waiting—The device is executing the schedule and the job is waiting to be executed.
•
In process—The job is being executed.
•
-NA-—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and the
execution results, execute the display scheduler logfile command.
Last execution status
Successful
210