Show Controllers Power Inline - Cisco catalyst 3750 Command Reference Manual

show controllers power inline

show controllers power inline
Use the show controllers power inline user EXEC command to display the values in the registers of the
specified Power over Ethernet (PoE) controller.
Syntax Description instance
module switch
number
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(19)EA1
Usage Guidelines
For the Catalyst 3750-48PS switches, the instance range is 0 to 11.
For the Catalyst 3750-24PS switches, the instance range is 0 to 5.
For the Catalyst 3750G-48PS switches, the instance range is 0 to 2. For instances other than 0 to 2, the
switches provides no output.
For the Catalyst 3750G-24PS switches, the instance range is 0 to 1. For instances other than 0 to 1, the
switches provides no output.
Though visible on all switches, this command is valid only for PoE switches. It provides no information
for switches that do not support PoE.
The output provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3750 Switch Command Reference
2-522
show controllers power inline [instance] [module switch-number] [ | {begin | exclude | include}
expression]
(Optional) Power controller instance, where each instance corresponds to four
ports. See the "Usage Guidelines" section for more information. If no instance is
specified, information for all instances appear.
(Optional) Limit the display to ports on the specified stack member. The switch
number is 1 to 9.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07