Cisco catalyst 3750 Command Reference Manual page 861

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Autostate mode exclude
Related Commands Command
show interfaces
[interface-id] switchport
show running-config
OL-8552-07
Description
Displays the administrative and operational status of a switching
(nonrouting) port, including autostate mode, if set.
Displays the current operating configuration. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference,
Release 12.2 > File Management Commands > Configuration File
Management Commands.
Catalyst 3750 Switch Command Reference
switchport autostate exclude
2-831