Cluster Run - Cisco catalyst 3750 Command Reference Manual

cluster run

cluster run
Use the cluster run global configuration command to enable clustering on a switch. Use the no form of
this command to disable clustering on a switch.
Syntax Description
This command has no arguments or keywords.
Defaults Clustering is enabled on all switches.
Command Modes Global configuration
Command History Release
12.1(11)AX
Usage Guidelines When you enter the no cluster run command on a cluster command switch or cluster command switch
stack, the cluster command switch is disabled. Clustering is disabled, and the switch cannot become a
candidate switch.
When you enter the no cluster run command on a cluster member switch, it is removed from the cluster.
Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a switch that is not part of a cluster, clustering is
disabled on this switch. This switch cannot then become a candidate switch.
Examples
This example shows how to disable clustering on the cluster command switch:
Switch(config)# no cluster run
You can verify your setting by entering the show cluster privileged EXEC command.
Related Commands Command
show cluster
Catalyst 3750 Switch Command Reference
2-102
cluster run
no cluster run
Modification
This command was introduced.
Description
Displays the cluster status and a summary of the cluster to which the switch
belongs.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07