Vmps Retry - Cisco catalyst 3750 Command Reference Manual

vmps retry

vmps retry
Use the vmps retry global configuration command to configure the per-server retry count for the VLAN
Query Protocol (VQP) client. Use the no form of this command to return to the default setting.
Syntax Description
count
Defaults
The default retry count is 3.
Command Modes Global configuration
Command History Release
12.1(11)AX
Examples This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Related Commands Command
show vmps
Catalyst 3750 Switch Command Reference
2-906
vmps retry count
no vmps retry
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
Modification
This command was introduced.
Description
Displays VQP and VMPS information.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07