Cisco catalyst 3750 Command Reference Manual page 483

Hide thumbs Also See for catalyst 3750:

Table of Contents

Catalyst 3750 Switch Cisco IOS Commands

This command will not work if the vty lines of the cluster command switch have access-class

configurations.

You are not prompted for a password because the cluster member switches inherited the password of the

cluster command switch when they joined the cluster.

This example shows how to start a session with member 3. All subsequent commands are directed to

member 3 until you enter the exit command or close the session.

Switch# rcommand 3

Switch-3# show version

Cisco Internet Operating System Software ...

Switch-3# exit

Related Commands

show cluster members

Displays information about the cluster members.

Catalyst 3750 Switch Command Reference

Chapters

Table of Contents