Exception Crashinfo - Cisco catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

exception crashinfo

Use the exception crashinfo global configuration command to configure the switch to create the
extended crashinfo file when the Cisco IOS image fails. Use the no form of this command to disable this
feature.
Syntax Description
This command has no arguments or keywords.
Defaults
The switch creates the extended crashinfo file.
Command Modes Global configuration
Command History Release
12.2(25)SEC
Usage Guidelines
The basic crashinfo file includes the Cisco IOS image name and version that failed, a list of the processor
registers, and a stack trace. The extended crashinfo file includes additional information that can help
determine the cause of the switch failure.
If you enter the exception crashinfo global configuration command on a stack master, it configures all
the stack members to create the extended crashinfo file if the Cisco IOS image on the stack members fail.
Use the no exception crashinfo global configuration command to configure the switch to not create the
extended crashinfo file.
Examples This example shows how to configure the switch to not create the extended crashinfo file:
Switch(config)# no exception crashinfo
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
show running-config
OL-8552-07
exception crashinfo
no exception crashinfo
Modification
This command was introduced.
Description
Displays the operating configuration, including defined macros.
For syntax information, select Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2 > File
Management Commands > Configuration File Management
Commands.
Catalyst 3750 Switch Command Reference
exception crashinfo
2-189