Cisco catalyst 3750 Command Reference Manual page 732

show sdm prefer
This is an example of output from the show sdm prefer dual-ipv4-and-ipv6 default command entered
on a desktop switch:
Switch# show sdm prefer dual-ipv4-and-ipv6 default
"desktop IPv4 and IPv6 default" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of IPv6 multicast groups:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
This is an example of output from the show sdm prefer command when you have configured a new
template but have not reloaded the switch:
Switch# show sdm prefer
The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of igmp groups + multicast routes:
number of unicast routes:
number of qos aces:
number of security aces:
On next reload, template will be "desktop vlan" template.
Related Commands Command
sdm prefer
Catalyst 3750 Switch Command Reference
2-702
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of directly connected hosts:
number of indirect routes:
Description
Sets the SDM template to maximize resources for routing or VLANs or to the
default template, to select a dual IPv4 and IPv6 template, or to select the
desktop or aggregator templates.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
2K
1K
3K
2K
1K
1K
2K
1K
0
512
1K
0
510
510
3K
1K
11K
3K
8K
512
1K
OL-8552-07