Reset - Cisco catalyst 3750 Command Reference Manual

reset

reset
Use the reset bootloader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
Syntax Description This command has no arguments or keywords.
Command Modes
Bootloader
Command History Release
12.1(11)AX
Examples This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Related Commands Command
boot
Catalyst 3750 Switch Command Reference
A-18
reset
Modification
This command was introduced.
Description
Loads and boots up an executable image and enters the command-line
interface.
Appendix A Catalyst 3750 Switch Bootloader Commands
OL-8552-07