Cisco catalyst 3750 Command Reference Manual page 659

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Table 2-33
Field
Admin Key
Oper Key
Port Number
Port State
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags:
Channel group 3 neighbors
Partner's information:
Port
Gi2/0/1
Partner's information:
Port
Gi2/0/2
OL-8552-07
show lacp internal Field Descriptions (continued)
S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs
A - Device is in Active mode
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Description
Administrative key assigned to this port. LACP automatically
generates an administrative key value as a hexadecimal number.
The administrative key defines the ability of a port to aggregate
with other ports. A port's ability to aggregate with other ports is
determined by the port physical characteristics (for example,
data rate and duplex capability) and configuration restrictions
that you establish.
Runtime operational key that is being used by this port. LACP
automatically generates this value as a hexadecimal number.
Port number.
State variables for the port, encoded as individual bits within a
single octet with these meanings:
bit0: LACP_Activity
•
bit1: LACP_Timeout
•
bit2: Aggregation
•
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
bit6: Defaulted
•
bit7: Expired
•
In the list above, bit7 is the MSB and bit0 is the LSB.
Note
P - Device is in Passive mode
Partner
Port Number Age
0xC 19s
Partner Partner
Oper Key Port State
0x3 0x3C
Partner
Port Number Age
0xD 15s
Partner Partner
Oper Key Port State
0x3 0x3C
Catalyst 3750 Switch Command Reference
show lacp
Partner
Flags
SP
Partner
Flags
SP
2-629