Debug Platform Backup Interface - Cisco catalyst 3750 Command Reference Manual

Appendix B Catalyst 3750 Switch Debug Commands

debug platform backup interface

Use the debug platform backup interface privileged EXEC command to enable debugging of the
Flex Links platform backup interface. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Platform backup interface debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(20)SE
Usage Guidelines The undebug platform backup interface command is the same as the no platform debug backup
interface command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands Command
show debugging
OL-8552-07
debug platform backup interface
no debug platform backup interface
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
debug platform backup interface
Catalyst 3750 Switch Command Reference
B-35