Show Eap - Cisco catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

show eap

Use the show eap privileged EXEC command to display Extensible Authentication Protocol (EAP)
registration and session information for the switch or for the specified port.
Syntax Description
registrations
method name
transport name
sessions
credentials name
interface interface-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines When you use the show eap registrations privileged EXEC command with these keywords, the
command output shows this information:
•
•
•
When you use the show eap sessions privileged EXEC command with these keywords, the command
output shows this information:
•
•
•
•
•
OL-8552-07
show eap {{registrations [method [name] | transport [name]]} | {sessions [credentials name
[interface interface-id] | interface interface-id | method name | transport name]}}
[credentials name | interface interface-id | transport name] [ | {begin | exclude | include}
expression]
Display EAP registration information.
(Optional) Display EAP method registration information.
(Optional) Display EAP transport registration information.
Display EAP session information.
(Optional) Display EAP method registration information.
(Optional) Display the EAP information for the specified port (including
type, stack member, module, and port number).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
None—All the lower levels used by EAP and the registered EAP methods.
method name keyword—The specified method registrations.
transport name keyword—The specific lower-level registrations.
None—All active EAP sessions.
credentials name keyword—The specified credentials profile.
interface interface-id keyword—The parameters for the specified interface.
method name keyword—The specified EAP method.
transport name keyword—The specified lower layer.
Catalyst 3750 Switch Command Reference
show eap
2-539