Boot Auto-Download-Sw - Cisco catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

boot auto-download-sw

Use the boot auto-download-sw global configuration command to specify a URL pathname to use for
automatic software upgrades. Use the no form of this command to return to the default setting.
Syntax Description
source-url
Defaults Disabled.
Command Modes
Global configuration
Command History Release
12.2(35)SE
OL-8552-07
boot auto-download-sw source-url
no boot auto-download-sw
The source URL alias for automatic upgrades. These options are
supported:
•
•
•
•
•
•
The image-name.tar is the software image to download and install on the
switch.
Modification
This command was introduced.
The syntax for the local flash file system on a standalone switch or the
stack master:
flash:
The syntax for the local flash file system on a stack member:
flash member number:
The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
The syntax for a secure HTTP server:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
Catalyst 3750 Switch Command Reference
boot auto-download-sw
2-51