Appendix E Updating Firmware On 1600T Cameras; Updating The Firmware With Smart Camera Update - Microscan Visionscape HE1600T Manual

E
APPENDIX E
This appendix contains two procedures for updating your Smart Camera:
• "Updating the Firmware with Smart Camera Update" on page E-1
• "Updating the Firmware with the Bootloader" on page E-3

Updating the Firmware with Smart Camera Update

Note: Do not cycle power on the Smart Camera during this procedure.
Use the following procedure to update the firmware on your Visionscape
Camera HE1600T with the Smart Camera Update utility:
Start the Smart Camera Update utility by selecting Start > Visionscape >
1.
Tools > HawkEye 1600(T) Firmware Update.
The Smart Camera Update utility displays its main screen, as shown in
Figure E–1.
Rev. 1H, Mar 2009
Updating Firmware on 1600T
Cameras
Visionscape® Smart Camera HE1600T Guide
E
®
Smart
E-1