Visionscape® Smart Camera He1600T Connection Matrix - Microscan Visionscape HE1600T Manual

When you are done, click OK. The camera will be rebooted automatically
3.
for the changes to take effect.
Note: All the Network parameters of the camera are stored in Non-Volatile
memory and can also be modified from the Bootloader (a low-level diagnostics
program) that can be invoked using HyperTerminal and a Serial connection. This
is described in Appendix E, "Updating Firmware on 1600T Cameras," as many
unique and useful parameters can only be changed using this method.
®
Visionscape Smart Camera HE1600T Connection Matrix
Table D–1 describes the various options such that the Camera and PC can
communicate fully over TCP/IP.
TABLE D–1.
Camera Host PC
DHCP DHCP
DHCP DHCP
Static Static
Rev. 1H, Mar 2009
Visionscape® Smart Camera HE1600T Connection Matrix
IP Addresses
DHCP
on LAN? Action
Yes Both get IP addresses from
Server
No Camera and Host may fall over
to compatible IP Addresses
(169.254.x.x) (255.255.0.0)
(Automatic Private IP
Addressing (APIPA))
N/A Camera and Host must be set to
compatible static IP address.
Default static IP for camera (as
delivered) is: 192.168.254.3.
Set PC to (for example)
192.168.254.2.
Both on (255.255.255.0) subnet.
Visionscape® Smart Camera HE1600T Guide
Connection
Yes
Maybe. Not all PCs
will default to
(169.254.x.x).
Some will default to
(0.0.0.0) – set static
IP on PC to APIPA
address (169.254.x.x
255.255.0.0).
Yes if IP Addresses
are compatible.
D-3
D