NEC 28i System Manual page 32

I-series
Hide thumbs Also See for 28i System:
Table of Contents

Advertisement

PMS Integration
Setting Up PMS Integration (cont'd)
After programming the PMS options and starting the PMS
system, you must use Program 1206 to initialize the PMS
DCI port. Optionally, you can dial Service Code 880 at the
DCI telephone to initialize the PMS DCI port.
For your reference . . .
0011 - Alarm Display Telephone
Assign the extension that should receive PMS and other alarms if
the system does not have an operator's extension assigned in
Program 1105.
0419 - COS Options (Part B), Item 5: PMS Restriction Level
Use this option to enable (1) or disable (0) a supervisor exten-
sion's ability to set the PMS Restriction Level for a room tele-
phone.
0514 - Service Code Setup (Part B) Item 56: PMS Restriction
Level Code
Use this option to set the service code supervisor's can dial to
change a room telephone's PMS Restriction Level.
0701 - Toll Restriction Class
Review the settings in this option when setting up the PMS
Restriction Level Conversion Table in Program 2804. For each
Toll Restriction Class assigned to an extension in Program 1004,
enable or disable the different Toll Restriction Tables set up in
Program 0702. The conversion table in Program 2804 uses these
assignments. Refer to the Software Manual for additional infor-
mation on Program 0701.
0702 - Toll Restriction Tables
Review the settings in this option when setting up the PMS
Restriction Level Conversion Table in Program 2804. Use
Program 0702 to set up the various Toll Restriction Tables and
options. Once set up, you assign the tables and options to Toll
Restriction Classes in Program 0701. Refer to the Software
Manual for additional information on Program 0701.
1004 - Toll Restriction Class Assignment
The assignment you make in this option affects the Toll
Restriction status of a room telephone when it is not checked in.
It has no affect on the PMS Restriction Level Conversion Table
in Program 2804. Refer to the Software Manual for additional
information on Program 1004.
1005 - Class of Service
Assign Class of Service to extensions.
2-24
!! Important !!

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

384i system704i system124i base system124i excpru system124i enhanced system

Table of Contents