Auto Room Scan - NEC 28i System Manual

Message
PMS LINK NOW ONLINE
PMS INITIAL STARTED
PMS INITIAL FINISHED
PMS LINK NOW OFFLINE
NO LINE TEST ACK PMS
NO ACK SIGNAL FM:PMS
BAD FUNCTION FM:PMS
BAD STATUS
BAD STATION
CHECKOUT WITH MSG
CHECKOUT WITH WAKEUP
CHECKOUT W MSG&WAKE

Auto Room Scan

With Auto Room Scan enabled, the phone system automatically scans all
checked-in rooms at 3:00 AM and changes their house keeping status to
maid required. The phone system then sends the new house keeping status
to the PMS system. Auto Room Scan streamlines staff scheduling each
morning since the phone system and PMS system always have an updated
record of the rooms that need attention.
PMS Alarm Messages
The PMS link is available (i.e., the
phone system and PMS system are
successfully communicating).
The phone system has sent an
Initialization Request (RQINZ)
message to the PMS and is wait-
ing for a response. Initialization
transfers the PMS database to the
phone system.
The database initialization
sequence has completed.
PMS messaging has stopped and
the phone system and PMS sys-
tem are no longer communicating.
After the phone system initiates a
linetest message, the PMS system
is not answering with an ACK
response.
During messaging, the PMS sys-
tem is not sending an ACK
response after receiving a mes-
sage from the phone system.
The PMS system has sent an
improper command.
The PMS system has sent an
improper status code for a room
telephone.
The PMS system has sent a mes-
sage for an extension that does
not exist or is not functioning.
A room telephone has been
checked-out with an unanswered
Message Waiting.
A room telephone has been
checked out with an unanswered
Wake Up Call.
A room telephone has been
checked out with both an unan-
swered Wake Up Call and
Message Waiting.
PMS Integration
Description
2-13