NEC 28i System Manual page 51

Toll Restriction (When Checked In)
The following diagram shows the basic operation of Toll Restriction
(When Checked In). When checked in, the room telephone follows the
Check In Toll Restriction Level (set in Program 1022). When checked out,
the room telephone follows the normal Toll Restriction Level (set in
Program 1004). Both levels interact with the dialing restrictions set up in
Program 0701 and 0702. For more details, see Setting Up Toll Restriction
(When Checked In) on the next page.
When first installed . . .
All room telephones can make unrestricted outgoing calls.
Check Out
Use Normal Toll
Restriction Level
(1004)
Using Toll Restriction (When Checked In)
To change a room telephone's Toll Restriction (When Checked In)
level:
1. Lift the handset.
2. Dial 137.
3. Dial the number of the extension for which you want to change
the Toll Restriction (When Checked In) level.
You hear a single beep.
4. Enter the new Toll Restriction (When Checked In) level (01-15).
You hear confirmation tone.
Room
Telephone
Set up Toll Restriction
Scenarios (0701 &
0702)
Check In
Use Check In Toll
Restriction Level
(1022)
2-43