0514 - Service Code Setup (Part B); Description - NEC 28i System Manual

0514 - Service Code Setup (Part B)

Description

Use Program 0514 - Service Code Setup (Part B) to customize the
second set of Service Codes. You can customize additional Service
Codes in Program 0511 (Service Code Setup [Part A]). You will have
to customize your Service Codes if the extension numbers you select-
ed in Program 0502 overlap the default Service Codes (100-199 and
800-899).
The following chart shows:
The number of each code (001 -100).
The code's default assignment. For example, dialing 881 (code
001) allows users to change the Music on Hold tone.
The feature reference for the code.
The function of the Service Code.
If you change a Service Code, be sure to record your entry in the
"New" column.
Conditions
None
Default Setting
Refer to the chart below.
Item Default
001 111
002 112
003 -
004 114
005 **
006 116
007 *8
008 -
009 890
010 -
011 -
012 -
013 -
4-28
Program 0514 - Service Code Setup, Part B
New Feature
"Voice Announce Unit"
"Voice Announce Unit"
Not used
"Voice Announce Unit"
"Directed Call Pickup"
"Voice Announce Unit"
"Voice Mail"
Not used
"Voice Over"
"Call Forwarding"
Not used
Not used
Not used
Function
Listening to the General Message
Recording, listening to or erasing the General
Message
After calling busy extension through VAU.
After dialing code, voice prompt asks you to
leave your number for a return call.
Pickup a call ringing or waiting at an extension
Recording, listening to or erasing a VAU
message.
Calling your mailbox
Initiating a Voice Over. This code is only
available if you disable Single Digit Dialing
code 09 in Program 0512.
Canceling a Call Forwarding, Personal
Greeting or Park and Page. This code is cur-
rently not implemented.