Wake Up Call - NEC 28i System Manual

Wake Up Call

Have your
guests set
their Wake Up
Calls — or
you can set
Wake Ups for
them.
A Wake Up Call is like an alarm clock: just set it and it will alert the guest
at prescribed time. But unlike a simple alarm clock, Wake Up Call has
some unique advantages:
Guests can set or cancel Wake Up Calls for themselves, or you
can set and cancel Wake Ups for them.
When a guest answers their Wake Up Call, you can have the sys-
tem play them Music on Hold, a prerecorded message, or a prere-
corded message followed by the time. If you choose the message
or message/time option, your system will repeat the message three
times and then cancel the Wake Up Call. (This option is only
available from analog single line telephones.)
You can view the status of all the wake ups from your DSS
Console. Just press WAKE UP to see which rooms have
reminders set. Refer to DSS Console Monitoring in this section for
more.
Optionally have unanswered Wake Up Calls call the operator and
print on the Room Status Printout report. This helps you find out
who needs another reminder or might need assistance. See Room
Status Printouts in this section for more on the printed report.
Use Wake Up Call as a meeting reminder for convention attendees.
If the meeting time gets changed, you can reset the reminder for all
attendees.
When first installed . . .
No guests can set Wake Up Calls. In addition, no extensions can
set wake up calls for other extensions.
2-46