Feature Cross Reference; Telephone Programming Instructions - NEC 28i System Manual

0501 - System Numbering

Feature Cross Reference

Flexible Numbering Plan

Telephone Programming Instructions

To enter data for Program 0501 (System Numbering):
1. Enter the programming mode.
2. 0501 + HOLD.
Tenant No:
3. Enter the number of the Tenant Group you want to program (1-4)
+ HOLD
DIAL
4. Enter the digit(s) you want to change + HOLD
You can enter either one or two digits. Refer to the Dialed
Number column in the table beginning on page 4-12 .
Digit:n
5. Enter the number of digits required for the code selected in step
4 + HOLD
Refer to the Number of Digits Required column in the
table beginning on page 4-12.
Kind:n
6. Enter the Dial Type for the code selected + HOLD
Refer to the Dial Type column in the table beginning on
page 4-12.
Dial?
7. Repeat from step 4 to program another code.
OR
HOLD + Repeat from step 3 to select another Tenant Group.
OR
HOLD + HOLD to exit.
4-18