NEC 28i System Manual page 73

Telephone Programming Instructions
To enter data for Program 0413 (Hotel Room Status Printer):
1. Enter the programming mode.
2. 0413 + HOLD.
Tenant No?
3. Enter the number of the Tenant Group you want to program (1-4)
+ HOLD
PRINT_PORT:
4. Enter the number of the DCI software port (1-144, 145-288) you
want to connect to the Room Status Printer + HOLD
PRINT ITEM_1:
5. Enter data (0 or 1) for Item 1 (see above) + HOLD
PRINT ITEM_2:
6. Enter data (0 or 1) for Item 2 (see above) + HOLD
Item_28
7. HOLD to program this item for another Tenant OR HOLD + HOLD
to exit.
0413 - Hotel Room Status Printer
3-15