Sata Connector J2; Sata Connector J2 Pinout - Kontron CP6003-SA User Manual

CP6003-SA
A.4

SATA Connector J2

The SATA connector, J2, on the MMADP-SATA01 module is connected to the 2.5" SATA
HDD/SSD mounted on the CP6003-SA. The SATA connector is divided into two segments, a
signal segment and a power segment.
Figure A-2: SATA Connector J2
Signal
Segment
Power
Segment
ID 1044-9757, Rev. 2.0
Table A-2: SATA Connector J2 Pinout
S1
S7
P1
P15
CP6003-SA-MK2.5SATA
PIN SIGNAL
Signal Segment Key
S1 GND Ground signal
S2 SATA_TX+ Differential Transmit+
S3 SATA_TX- Differential Transmit-
S4 GND Ground signal
S5 SATA_RX- Differential Receive-
S6 SATA_RX+ Differential Receive+
S7 GND Ground signal
Signal Segment "L"
Central Connector Polarizer
Power Segment "L"
P1 3.3V 3.3V power
P2 3.3V 3.3V power
P3 3.3V 3.3V power
P4 GND Ground signal
P5 GND Ground signal
P6 GND Ground signal
P7 5V 5V power
P8 5V 5V power
P9 5V 5V power
P10 GND Ground signal
P11 RES Reserved
P12 GND Ground signal
P13 12V (NC) Not connected
P14 12V (NC) Not connected
P15 12V (NC) Not connected
Power Segment Key
FUNCTION I/O
--
O
O
--
I
I
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Page A - 5