Table of Contents
Advertisement
Functional Description
2.10.7
Serial ATA Interface
The CP6003-SA provides six Serial ATA (SATA) interfaces with RAID support, two interfaces
are implemented as onboard SATA connectors and four SATA interfaces are available only on
the rear I/O.
The onboard SATA interfaces support up to 6 Gb/s SATA. One of the onboard SATA connec-
tors, J17, supports the mounting of either SATA Flash module or an onboard 2.5" HDD/SSD
via the MMADP-SATA01 module. The other SATA connector, J14, is used for standard SATA
devices with cable connection.
All six SATA ports provide high-performance RAID 0/1/5/10 functionality.
2.10.7.1
Serial ATA Connector J14
The CP6003-SA provides a standard SATA connector, J14, for connecting SATA devices to the
CP6003-SA.
Figure 2-5: SATA Con. J14
7
1
Note ...
If the onboard SATA connector, J14, will be used, due to the big SATA connec-
tor and the stiff SATA cable, the CP6003-SA will exceed the thickness of 4HP.
Page 2 - 16
Table 2-12: SATA Connector J14 Pinout
PIN
SIGNAL
1
GND
2
SATA_TX+
3
SATA_TX-
4
GND
5
SATA_RX-
6
SATA_RX+
7
GND
CP6003-SA
FUNCTION
Ground signal
Differential Transmit +
Differential Transmit -
Ground signal
Differential Receive -
Differential Receive +
Ground signal
ID 1044-9757, Rev. 2.0
I/O
--
O
O
--
I
I
--
Advertisement
Table of Contents
