Standards - Kontron CP6003-SA User Manual

Introduction
1.6

Standards

The board complies with the requirements of the following standards:
Table 1-2: Standards
TYPE ASPECT
CE Emission
Immission
Electrical Safety
Mechanical Mechanical Dimensions IEEE1101.10
Environmental Climatic Humidity
WEEE
RoHS
Vibration
(Sinusoidal)
Single Shock
Permanent Shock
Page 1 - 16
STANDARD
EN55022 --
EN61000-6-3
EN55024 --
EN61000-6-2
EN60950-1 --
--
IEC60068-2-78 93% RH at 40°C, non-condensing
(see note below)
Directive Waste electrical and electronic equipment
2002/96/EC
Directive Restriction of the use of certain hazardous sub-
stances in electrical and electronic equipment
2002/95/EC
IEC60068-2-6 Ruggedized version test parameters:
• 10-300 (Hz) frequency range
• 2 (g) acceleration
• 1 (oct/min) sweep rate
• 10 cycles/axis
• 3 axes
IEC60068-2-27 Ruggedized version test parameters:
• 30 (g) acceleration
• 9 (ms) shock duration half sine
• 3 number of shocks per direction (total: 18)
• 6 directions
• 5 (s) recovery time
IEC60068-2-29 Ruggedized version test parameters:
• 15 (g) acceleration
• 11 (ms) shock duration half sine
• 500 number of shocks per direction
• 6 directions
• 5 (s) recovery time
CP6003-SA
REMARKS
ID 1044-9757, Rev. 2.0